Olivetti 2701 Manuel D’Utilisation

The erase function is used to erase the shadow lines on copies that are produced when copying thick originals or 
books. The erase modes that can be selected are shown below. The erase width is initially set to 10 mm (1/2").

Eliminates shadow lines around the edges of copies 
caused when heavy paper or a book is copied.

Eliminates shadow lines produced by the bindings of 
bound documents.

Eliminates both the shadow lines around the edges of 
copies and the shadow at the centre.

The erase setting screen 
will appear.
The erase icon (

, etc.) 

will also appear in the 
screen to indicate that 
the function is turned on.

Select one of the three 
erase modes. The 
selected key will be 
highlighted.

Use the 

 and 

 keys 

to adjust the erase width.
The erase width can be 
set from 0 mm to 20 mm 
in increments of 1 mm (0" 
to 1" in increments of 
1/8").

You will return to the main screen of copy mode.

MU

ERASE

FT

PY

JOB

BUILD

ERASE

CENTER

ERASE

EDGE+CENTER

ERASE

EDGE

ERASE

EDGE

CANCEL

OK

10

(0  20)
mm

About the steps that follow
If the document glass is being used, see page 22.
If the RSPF is being used, see page 23.

• This feature cannot be used with 

non-standard size originals.

• This feature cannot be selected when 

mixed feeding (p.25) is used.

• To cancel the erase copy function, touch 

the [CANCEL] key in the erase setting 
screen. (See the screen of step 3.)