Samsung SLC460FWXAA Fiche De Données

This program is used to manually set the network IP address of your machine 

using its MAC address to communicate with the machine. The MAC address is 

the hardware serial number of the network interface and can be found in the 

Network Configuration Report. 

Before starting you will need to know the network name (SSID) of your wireless 

network and the network key if it is encrypted. This information was set when 

the access point (or wireless router) was installed. If you do not know about your 

wireless environment, please ask the person who set up your network.

To configure wireless parameters, you can use SyncThru™ Web Service.

Before starting wireless parameter configuration, check the cable connection 

status. 

Check whether or not the network cable is connected to the machine. If 
not, connect the machine with a standard network cable.

Start a web browser such as Internet Explorer, Safari, or Firefox and enter 
your machine’s new IP address in the browser window.

For example,

Click Login on the upper right of the SyncThru™ Web Service website.

If it’s your first time logging into SyncThru™ Web Service you need to 
log-in as an administrator. Type in the below default ID and password. 
We recommend you to change the default password for security 
reasons.

•

ID: admin 

•

When the SyncThru™ Web Service window opens, click Network 
Settings.

Click Wireless > Wizard.

 

Wizard will help you setup the wireless network configuration. However, if 
you want to set the wireless network directly, select Custom.