Xerox FlowPort Manuel D’Utilisation
Configuring a Document Centre 240/255/265/460/470/480/490 with Centreware Internet Services
4
Xerox Document Centre Setup Guide for FlowPort
4
Click on the plus (+) sign for the Distribution Templates.
5
Click the Repository Setup link.
6
Under Repository Setup, perform the following:
Repository List: Select Document Repository 0. Check with your Xerox
Document Centre System Administrator to make sure the Repository is not in use.
Document Centre System Administrator to make sure the Repository is not in use.
NOTE: Depending on the printer software model, there may only be 1 repository.
Some models will have Document Repositories of 0-4 or 1-5.
Some models will have Document Repositories of 0-4 or 1-5.
Protocols: Select TCP/IP.
File Server IP Address: Enter the TCP/IP address of your FlowPort server.
Contact your Network Administrator if you do not know the address. In some
versions, you may need to enter a port number. In this case, enter 21.
Contact your Network Administrator if you do not know the address. In some
versions, you may need to enter a port number. In this case, enter 21.
Directory Path: Enter /.
Login Name: Enter the guest account user name (NSA is the default guest account
user name).
user name).
Password: Enter the FTP password twice (nsa is the default guest password).
Note: If you have changed the NSA FTP user name or password in the
FlowPort NSA Protocol Service configuration, enter the new user name
and password here to enable FTP access.
FlowPort NSA Protocol Service configuration, enter the new user name
and password here to enable FTP access.