Xerox 721P83071 Manuel D’Utilisation

PRODUCT DIFFERENCES/USER CONSIDERATIONS

Figure 5-4 illustrates the portrait orientation shift and skew.  

Figure 5-4.

Page dimensions up to the physical capacity of the feeder trays
may be selected.  (The largest feeder tray physical capacity is
14.33 by 17.0 inches; the smallest is 7.0 by 10.0 inches with the
optional Paper Feeding Enhancement Kit installed).  At system
generation (sysgen), you can select USLETTER, USLEGAL, or A4;
or you can select “other” and specify any paper size between the
smallest and largest allowed (x by y) in millimeters.  11 by 17
inch/297 by 432 mm Interpress jobs are not supported, however,
your 4635 LPS handles 11 by 17/inch/297 by 432 mm IMG jobs.

The use of the PAPERSIZE command in PDL and the PAPER
command in FDL permits form compilation and job printing on a
size of paper other than the sysgened paper size and allows the
specification of nonstandard paper sizes for those jobs requiring
nonstandard paper.

It is recommended that you sysgen to the largest size paper that
you commonly use.  Smaller and less-used paper sizes should be
specified using PDL and FDL commands.  

Refer to the Xerox 4635 LPS PDL/DJDE Reference and 4635 LPS
Forms Creation Guide for more information on commands. 

The 4635 maximum imaging area (that is, the system page)
measures 14.33 by 17 inches. 

5-20

XEROX 4635 LASER PRINTING SYSTEM PRODUCT REFERENCE