Xerox 421 Manuel D’Utilisation
2-10
WorkCentre Pro 421 User Guide
Bypass Tray
The Bypass Tray is for loading special paper, transparencies,
labels and cardstock. There is an extension tray that can be
pulled out to enable larger size paper to be fed.
labels and cardstock. There is an extension tray that can be
pulled out to enable larger size paper to be fed.
HINT: Refer to Appendix B - Specifications for more
information about approved media.
information about approved media.
Optional Additional Memory
Two extra memory cards are available with 64mb on each.
There is a door on the back of the machine that provides
access to the memory card slots.
There is a door on the back of the machine that provides
access to the memory card slots.
Use the following procedure to insert additional memory cards
into the memory slots:
into the memory slots:
CAUTION: Switch off the power and disconnect the power
cord from the outlet prior to installing additional memory.
These components may be susceptible to Electro-Static
Discharge (ESD). Observe all ESD procedures to avoid
damage.
cord from the outlet prior to installing additional memory.
These components may be susceptible to Electro-Static
Discharge (ESD). Observe all ESD procedures to avoid
damage.
½
Switch off the power and
disconnect the power cord
from the outlet.
disconnect the power cord
from the outlet.
½
Locate the Memory Card slot
cover at the rear of the
machine and open the cover.
cover at the rear of the
machine and open the cover.
½
Remove any protective
packaging from the memory
cards and slide each card into
a Memory Card slot.
packaging from the memory
cards and slide each card into
a Memory Card slot.
½
Close the Memory Card slot
cover.
cover.
½
Reconnect the power cord
and switch on the machine.
and switch on the machine.
Memory cards are
inserted into these
slots
inserted into these
slots
Memory Card slots
cover
cover