Xerox 430 Manuel D’Utilisation

Enables the printing of addresses on envelopes as an 
alternative to using labels. It can hold a maximum of 70 
envelopes of 24lb (substance 24) paper at one time. The 
envelope tray can only be used in place of tray 1. Refer to 
“Paper and other media” on page 10-1 for more information.

This tray is located on the left side of the machine, under the 
Bypass Tray and Finisher or Left Tray. The tray can hold a 
maximum of 2000 sheets of 20lb (substance 20) paper, 8 1/2” 
x 11”, long edge feed. Refer to “Paper and other media” on 
page 10-1 for more information.

The Finisher can stack a variety of paper sizes from 5 1/2” x 8 
1/2” through 11 x 17” and can handle a maximum of 1000 
sheets of 20lb (substance 20) paper at one time. It can staple 
up to 50 pages of 20lb (substance 20) paper in one set. Refer 
to “Output” on page 3-10 for more information.

NOTE: The Finisher Stand or the High Capacity Feeder must 
also be fitted with the Finisher.

The Tower Mailbox is only available on the Copier/Printer, 
Copier/Fax/Printer. On the DC440/432/430/425 each bin can 
hold approximately 100 sheets of 5 1/2” x 8 1/2” through 11 x 
17” paper. On the DC426/420 each bin can hold approximately 
70 sheets of 5 1/2” x 8 1/2” through 11 x 17” paper. Refer to 
“Tower Mailbox” on page 8-5 for more information.

This two-tiered shelf attaches to the right hand side of the 
machine. The shelf is useful as a work area.

If the Convenience Shelf is fitted, the Convenience Stapler can 
also be installed to manually staple documents, or to staple 
output if the Finisher option is not fitted. The stapler can handle 
a maximum of 50 sheets of 20lb (substance 20) paper. Refer 
to page 3-13 for more information.

NOTE: The Convenience Shelf can be installed without the 
Convenience Stapler.