Toshiba e Studio45/35 Manuel D’Utilisation

Page de 100
30
Installing User Software on a Windows Computer
Setting up SMB printing with Windows NT 4.0 and/or 
Windows 2000
If you do not have a Novell network, you can print via SMB printing (also known as 
Windows printing or WINS printing). Printer driver installation for SMB printing via 
Point and Print is only available for the PostScript driver for Windows 95/98. You will 
need to install the drivers using the User Software CD. These instructions assume you 
have the TCP/IP Protocol and TCP/IP Printing software installed on the 
Windows NT 4.0 workstation.
To set up printing to a second or third connection, you must install a new printer by 
repeating the procedure “To set up SMB printing on Window NT 4.0 and/or 
Windows 2000” on page 30. I
f you install more than one printer, give each a 
descriptive name during printer driver installation, such as 
Aero-Print
 or 
Aero-Hold
, so 
you can easily identify printers.
B
EFORE
 
YOU
 
BEGIN
Configure the GA-1040 for SMB printing using TopAccess in other setup options.
SMB printing is referred to as Windows Printing in Setup, on the TopAccess and on 
the other tab of the Network Setup page. For more information, see the Configuration 
Guide
.
T
O
 
SET
 
UP
 SMB 
PRINTING
 
ON
 W
INDOW
 NT 4.0 
AND
/
OR
 W
INDOWS
 2000
1.
Double-click the Network Neighborhood (Windows NT 4.0) or My Network places 
(Windows 2000) icon to display your network environment.