Toshiba 170F Manuel D’Utilisation
139
The Department Code Standby
menu is shown below.
menu is shown below.
Enter the 5-digit Department
Code preset for your depart-
ment.
Code preset for your depart-
ment.
This procedure assumes that
you have selected and config-
ured Department Codes on
pages 52, 53 and 54 of this
manual.
you have selected and config-
ured Department Codes on
pages 52, 53 and 54 of this
manual.
Once selected, the use of the
facsimile is limited to autho-
rized personnel only.
facsimile is limited to autho-
rized personnel only.
NOTE:
The usage for each depart-
ment is recorded on the De-
partment Control List (see
page 195).
ment is recorded on the De-
partment Control List (see
page 195).
If the password you have en-
tered is valid, the ordinary
Standby Mode screen (as
shown below) will be displayed.
Access will be limited to one
transmission job or one Opera-
tion Panel function (printing a
list, accessing a Mailbox, etc.)
tered is valid, the ordinary
Standby Mode screen (as
shown below) will be displayed.
Access will be limited to one
transmission job or one Opera-
tion Panel function (printing a
list, accessing a Mailbox, etc.)
If the password does not
match, verify your password
and re-enter.
match, verify your password
and re-enter.
- ADVANCED TRANSMISSION FUNCTIONS
Department Code Access
DEPT CODE
Standby Menu
Standby Menu
1
Enter the
Department Code
Department Code
2
Complete the
Procedure
Procedure
3
Then press:
NOTE:
If you do not have a valid
Department Code Password,
you cannot access this fac-
simile.
Contact the key operator or
supervisor for more informa-
tion.
Department Code Password,
you cannot access this fac-
simile.
Contact the key operator or
supervisor for more informa-
tion.
NOTES:
• Upon entering a valid 5-
digit password, the
standby prompt will remain
on the LCD for one opera-
tion or one minute which-
ever occurs first.
standby prompt will remain
on the LCD for one opera-
tion or one minute which-
ever occurs first.
• If no keys are pressed for
about 60 seconds during
the above Standby Mode,
the screen will return to
DEPT CODE Standby
Menu.
the above Standby Mode,
the screen will return to
DEPT CODE Standby
Menu.
JAN-31 09:43 AM 80%
ENTER DEPT CODE
ENTER DEPT CODE
[*****]
JAN-31 09:43 AM 100%
AUTO RECEIVE