Xerox 2045e Manuel D’Utilisation

Troubleshooting

34

❒ If the problem cannot be solved, contact your sales or service representative.

No transmission 
when using 1394 
interface connec-
tion

Check using the following procedure:

A

Confirm the IEEE 1394 interface cable is connected securely.

B

Restart the computer.
If the error occurs even after executing the above operation, proceed to 
the following steps.

C

Unplug the IEEE 1394 interface cable connected to the computer.

D

Run the utility tool for the IEEE 1394 interface board, which is stored in 
the following path on the CD-ROM labeled “Printer Drivers and Utili-
ties”:
\UTILITY\1394\

For more information about using the utility tool for IEEE 1394, see 
the README file in the same directory on the CD-ROM.

E

Restart the computer.

Printing stops and 
a paper error is 
displayed if the 
custom size paper 
in the paper feed 
tray is specified 
when printing 
with the Post-
Script 3 printer 
driver.

Follow the one of the procedures below:

• Press [Job Reset] on the display panel to stop printing. Place the custom 

size paper in the bypass tray, and then start printing.

• Select the paper feed tray with custom size paper, and then press [Con-

 to force printing.

When connecting 
the machine using 
USB 2.0, the first 
page of a print job 
that contains a 
large volume of 
data is printed, 
but the remaining 
pages are not.

Check that USB Printing Support is installed on your computer.

See “Installing the Printer Driver Using USB”, Printer Reference 1.