Epson CX9475Fax Manuel D’Utilisation

Install Software and Set Up the Print Server

You need to install the drivers and other software for the all-in-one and print 
server. Follow the on-screen instructions to connect and power on the print server.

Note: 
ABBY

®

 Fine Reader Sprint is not included with the Epson Stylus CX9475Fax.

1. Insert the CX9475Fax software installation CD.

With Windows Vista, if you see the AutoPlay window, click 

Run Epsetup.exe

. When you see the User Account Control screen, 

click 

Continue

.

2. Click 

Install

 and follow the on-screen instructions.

3. Select 

Install driver for network connection

 and click 

Next

.

Note: 
If you want to install your all-in-one on a single computer using a USB cable, select 
Install driver for USB. Follow the on-screen instructions. When installation is 
complete, you’re ready to print.

4. Select the correct option for setting up your all-in-one for the first time, or 

for an additional computer. Then click 

Next 

and follow the on-screen 

instructions.

5. Follow the on-screen instructions to plug the included USB cable into the 

print server and your all-in-one. Then click 

Next

.

6. Plug one end of the included Ethernet cable into any available port on your 

network access point or router. Then plug the other end into the Ethernet 
port on the print server and click 

Next

. 

7. Plug the print server power adapter into the print server and an electrical 

outlet. Then click 

Next

.

8. Make sure your all-in-one is plugged in and turned on. Then click 

Next

. 

The print server software is installed.

Follow the instructions in one of these sections to configure the print server:

■

Configuring for Easy Installation: If you want to use the all-in-one on a 
wireless network using standard settings

■

Configuring for Advanced Installation: If you want to configure the IP 
address manually or use the print server in a wired network environment