DELL C3765dnf Mode D'Emploi

Printing Using ColorTrack (External Authentication)

You can specify only the settings of ColorTrack Mode, Non Registered User, and ColorTrack Error Report using the 

operator Panel.

1 Press the 

 (Information) button.

2 Select the Tools tab, and then select Admin Settings.
3 Select  

until 

System Settings appears, and then select System Settings.

4 Select  

until 

ColorTrack Mode appears, and then select ColorTrack Mode.

5 Select External Mode, and then select OK.
6 Select  

until 

Non Registered User appears, and then select Non Registered User.

7 Select Off or On, and then select OK.
8 Select  

until 

ColorTrack Error Report appears, and then select ColorTrack Error Report.

9 Select Off or On, and then select OK.

10 Turn off the printer, and turn it on again to apply the settings.

The following two authentication modes are available: the Internal Mode using user information registered on the 

printer, and the External Mode using user information registered on an external server. To authenticate on the 

external authentication server with External Mode, you need not register user information on the printer. The 

change becomes effective after the printer is turned off and then on again.

Specify whether to permit the printing of data with no authentication information. This setting is enabled when the 

printer is restarted. The change becomes effective after the printer is turned off and then on again.

Specify the password to be used for non-account user using 1 to 127 alphanumeric characters. If the password is left 

blank (NULL), you cannot log in to a server. The change becomes effective after the printer is turned off and then 

on again.

When External Mode is specified and Non Registered User is set to On, you must set a password.

When using an LDAP server, you also must set the same password on the server.

Enter the Non Registered user password again to confirm it.

Specify whether to automatically print error-related information if printing using ColorTrack results in an error.

Click Setup Remote Authentication Page to display the Authentication System page.

This item is displayed only when External Mode is specified.

Specify the server authentication type, the server response time-out, or the search time-out.