DELL C3765dnf Mode D'Emploi
Troubleshooting Guide
533
• Pitched color dots
• Vertical blanks
• Ghosting
• Light-induced fatigue
• Fog
• Bead-Carry-Out (BCO)
• Jagged characters
• Banding
• Auger mark
• Wrinkled/Stained paper
• Damage on the leading edge of paper
• Vertical blanks
• Ghosting
• Light-induced fatigue
• Fog
• Bead-Carry-Out (BCO)
• Jagged characters
• Banding
• Auger mark
• Wrinkled/Stained paper
• Damage on the leading edge of paper
The output is too light
Action
Yes
No
1
The toner cartridges may be low or need to be replaced. Confirm the
amount of toner left in each toner cartridge.
a
Check the toner level in the Status tab in the Status Monitor.
b
Replace the toner cartridges as necessary.
Does this solve your problem?
The task is complete.
Go to action 2.
2
If you are using non-Dell brand toner cartridges, enable the Non-Dell
Toner option.
a
Launch the Tool Box, and click Service Tools on the Printer
Maintenance tab.
b
Ensure that the On check box under Non-Dell Toner is selected.
Does this solve your problem?
The task is complete.
Go to action 3.
3
Disable the Toner Saver in the printer driver.
a
On the Others tab, ensure that Off is selected in the Toner Saver
drop-down menu.
Does this solve your problem?
The task is complete.
Go to action 4.
4
The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to
thick.
a
On the General tab, change the Paper Type setting.
Does this solve your problem?
The task is complete.
Go to action 5.