DELL 1130N MONO LASER PRINTER Manuel D’Utilisation

Troubleshooting

Print media misfeeds or 

multiple feeds occur

Ensure that the print media you are using meets the 

specifications for your printer. See "Supported Paper 

Sizes" on page 162 for more information.
Fan the print media before loading it.
Ensure that the print media is loaded correctly.
Do not overfill the print media sources.
Do not force print media into the Priority Sheet 

Inserter (PSI) or the Multipurpose Feeder (MPF) 

when you load it. Otherwise, it may skew or buckle.
Ensure that the print media is not curled.
Load the recommended print side correctly for the 

type of print media you are using. See "Loading Print 

Media" on page 165 for more information.
Turn the print media over or around and try printing 

again to see if feeding improves.
Do not mix print media types.
Do not mix reams of print media.
Remove the top and bottom curled sheets of a ream 

before loading the print media.
Load a print media source only when it is empty.

The envelope is creased after 

printing.

Ensure that the envelope is loaded as instructed in 

(MPF)" on page 166 or "Loading Print Media in the 

Page breaks in unexpected 

places.

Increase the setting for Time-Out in the Printer 

Settings menu in the Dell Printer Configuration Web 

Tool.

Job prints from the wrong 

source or on the wrong print 

media.

Check the 

Paper Type

 on the printer operator 

panel and in the printer driver.

Print media does not stack 

neatly in the output bin.

Turn the print media stack over in the PSI and MPF.