Konica Minolta 250 Manuel D’Utilisation
9
Specifying management settings
9-54
200/250/350
Spe
c
if
y
ing
ma
nag
eme
n
t s
e
tti
ng
s
Chap
ter
9
Specifying settings to limit the use of communication modes-2 (mode
476)
476)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
modes. Prohibited communication modes do not appear in their selection
screens.
2
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not nor-
mally be displayed.
screens, such as those for specifying transmission settings, may not nor-
mally be displayed.
Factory settings
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
right refer to the descriptions of the corresponding functions.
1
Specifies whether or
not the use of SNMP
is prohibited.
not the use of SNMP
is prohibited.
0
Permitted
----------
1
Prohibited
0
-----------------------
0
*Do not change this bit
when specifying settings
for this function.
when specifying settings
for this function.
----------
Bit
Description
Setting
Description
Page Refer-
ence
ence
Bit
7 6 5 4 3 2 1 0
Setting
0 0 0 0 0 0 0 0 (HEX: 00)
Bit
Description
Setting
Description
Page Refer-
ence
ence
7
Specifies whether or
not the use of the
Scan to SMB opera-
tion is prohibited.
not the use of the
Scan to SMB opera-
tion is prohibited.
0
Permitted
----------
1
Prohibited
6
Specifies whether or
not the use of SMB
printing is prohibit-
ed.
not the use of SMB
printing is prohibit-
ed.
0
Permitted
----------
1
Prohibited
5
Specifies whether or
not the use of G3
faxing is prohibited.
not the use of G3
faxing is prohibited.
0
Permitted
----------
1
Prohibited