DoubleSight Displays DS-263N Manuel D’Utilisation

Display Controls

Function Description

The monitor has four function control buttons to select among functions shown on OSD menu, designed for

easy user-viewing environments.

OSD Function Menu

To activate the OSD Main menu, simply press ”Menu” button , the menu diagram will pop up on the screen as

shown on Fig. 2-2
Use the 4D+1 key to navigate through the function you want to adjust. Push the 4D+1 key to enter a sub-menu

and adjust the value. Push the 4D+1 key again to exit the sub-menu. Pressing the "Exit" buttons allows you to

exit the OSD menu at any time. Pressing the "Menu" key gets you back to the main menu.

Figure 2-2

Menu under input

Attention
Firmware revision may have been updated into a latest version while the version number shown on informati

on item in OSD menu will stay as Ver 1

Information OSD

Figure 2-3

Figure

Function

Function Description

DV MODE

The following DV mode display setting can be selected by

OSD (STANDARD/TEXT/sRGB/MOVIE/GAMING/PHOTO)

Default setting: TEXT

BRIGHTNESS Adjust the brightness.

Factory setting: 100.0%

CONTRAST Adjust the image contrast.

Factory setting:50.0%

SHARPNESS Adjust the sharpness.

Factory setting: 50%

AUTO

CONTRAST

(D-SUB or DVI-I

Analog signal

Only)

Adjust the CONTRAST to the optimal value for the

video-input level automatically.

AUTO ADJUST

(D-SUB or DVI-I

Analog Input

Only)

Adjust the H.POSITION, V.POSITION, H-SIZE and FINE to

the optimal value automatically.

EXPANSION

MODE

This function allows you to choose from different display

modes:
Full: expands all resolution to full screen.
Aspect: enlarges native resolution to either horizontal or

vertical limit.
Real: displays native resolution.
Default setting: FULL

LEFT/RIGHT

(D-SUB or DVI-I

Analog Input

Only)

Adjust the horizontal image position.

DOWN/UP

(D-SUB or DVI-I

Analog Input

Only)

Adjust the vertical image position.

CLOCK

(D-SUB or DVI-I

Analog Input

Only)

Adjust the sync frequency of internal pixel clock.

PHASE

(D-SUB or DVI-I

Analog Input

Only)

Adjust the value for improve display focus.

Color

Temperature

Choose different color temperature
(9300K, 7500K, sRGB, USER).
Default is USER.
USER mode adjustable.

Adjust the contrast and brightness of each color of the

white balance.

RED

GREEN

BLUE

GAIN

Allows you to adjust the Red/Green/Blue color gain.

RED

GREEN

BLUE

OFFSET

Allows you to adjust the Red/Green/Blue color offset.

SATURATION

Adjust color depth, increasing this value makes pictures

more colorful, decreasing makes pictures less colorful.

Adjustable value from -100 to 100.

Factory setting: 0

DDC/CI

DDC/CI allows you to control certain settings of the

monitor via computer.
Default is ON.

SIDE COLOR

When "Full" is not selected in the "Expansion Mode" and

the resolution is under the LCD panel's native resolution,

the picture does not display at full screen. The

borders/sides around the picture can be customized.

Adjust "Side Color" to customize the color of the

border/sides around the picture.

RECALL

Reset all user settings to factory preset value except

language selection.

LANGUAGE Select a language for OSD menu.

OSD

LEFT/RIGHT

OSD UP/DOWN

Control the location of the OSD menu on the screen.

Factory setting: Center of the screen.

OSD TURN OFF Select OSD Menu turn off time.

Factory setting: 45 seconds.