DoubleSight Displays DS-15xx Manuel D’Utilisation
User’s Manual
www.doublesight.com
17
Removing Base Stand from the Display
If you need to disconnect the base stand from the display, use the
bottom layer of foam packaging in the box as a secure material to
protect the LCD panels. Using both hands, firmly grip each outer
edge of the dual display frame and place face down on top of the foam
packaging.
bottom layer of foam packaging in the box as a secure material to
protect the LCD panels. Using both hands, firmly grip each outer
edge of the dual display frame and place face down on top of the foam
packaging.
Push the base stand handle backward with your left hand. The base
stand will be released from the display. If the base stand is not
released easily, press the pin in the middle hole on the display’s back
silver face plate (right side of the base stand handle) using a tool such
as a screw driver and push the base stand handle backward.
stand will be released from the display. If the base stand is not
released easily, press the pin in the middle hole on the display’s back
silver face plate (right side of the base stand handle) using a tool such
as a screw driver and push the base stand handle backward.
NOTE
DoubleSight monitor supports VESA (Video Electronics Standards
Association, display and display interface standard)-compatible
mounting method. You can use alternative mounting brackets from
other vendors to hold your DoubleSight monitor. For safety, the
DoubleSight monitor must be mounted to an arm that guarantees
stability under consideration of the weight of the display (5.4 kg or 12
lbs).
Association, display and display interface standard)-compatible
mounting method. You can use alternative mounting brackets from
other vendors to hold your DoubleSight monitor. For safety, the
DoubleSight monitor must be mounted to an arm that guarantees
stability under consideration of the weight of the display (5.4 kg or 12
lbs).
Push backward
Push backward