Toshiba e-STUDIO351c Manuel D’Utilisation
e-STUDIO281c/351c/451c ADJUSTMENT
June 2005 © TOSHIBA TEC
3 - 84
3.13.5
Releasing the stack tray guide lever fixing plate
(1) Remove the right inner cover and the rear cover.
(2) Remove the finisher control PC board, PC board bracket and sensor PC board.
(3) Remove the stack tray.
(4) Remove the stack tray drive unit.
(2) Remove the finisher control PC board, PC board bracket and sensor PC board.
(3) Remove the stack tray.
(4) Remove the stack tray drive unit.
Note:
Note:
When removing the mounting screw, be sure to hold the stack tray guide lever up from below.
Fig.3-80
(5) Place the stack tray guide lever fixing plate
so that it is in view through the hole in the
side plate (front, rear). Then remove the fix-
ing screw. (Perform the same for the front
and the rear.)
side plate (front, rear). Then remove the fix-
ing screw. (Perform the same for the front
and the rear.)
Fig.3-79
Screw
Stack tray guide lever
fixing plate
fixing plate
Stack tray
guide lever
guide lever