JVC TM-H1900G Manuel D’Utilisation
ENGLISH
EXIT
CHROMA
MENU
PHASE
BRIGHT
CONTRAST
VOLUME/SELECT
< MENU >
4
SHARPNESS
: 00
ADJ. BAR POSI.
: LOWER
COLOR TEMP.
: 6500
COLOR SYSTEM
: AUTO
RUSH DELAY
: STD.
ASPECT RATIO
: 4-3
Menu items
Purpose
Setting range
SHARPNESS
Picture sharpness
ADJ.BAR POSI
Volume bar position
COLOR TEMP.
Color temperature of white
balance
balance
COLOR SYSTEM
Color system
RUSH DELAY
Delay value
ASPECT RATIO
Aspect ratio
Front panel
Function
Contents
button
displayed
+
Increase (to max. value)
4
Forward the setting value
–
Decrease (to min. value)
1
Reverse the setting value
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
Front panel
Function
Contents
button
displayed
CHROMA/
Forward selection mark (4)
PHASE
CONTRAST/
Reverse selection mark (4)
BRIGHT
Front panel
Function
Contents
button
displayed
MENU
EXIT
Quit (or Release) the <MENU>
screen
screen
1
2
3
4
HOW TO USE THE MENU FUNCTIONS
• SHARPNESS
• COLOR SYSTEM
• ADJ. BAR POSI.
• RUSH DELAY
• COLOR TEMP.
• ASPECT RATIO
You can set the following menu items.
Set them depending on your needs.
Set them depending on your needs.
1. Press the MENU button.
The <MENU> screen is displayed.
* The on-screen display goes off automatically after about five
* The on-screen display goes off automatically after about five
minutes with operation performed.
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select MENU items.
A selection mark (4) is put next to the selected item.
SHARPNESS
ADJ. BAR POSI.
COLOR TEMP.
COLOR SYSTEM
RUSH DELAY
ASPECT RATIO
3. Press the VOLUME/SELECT buttons to set.
4. If you want to set the other menu items, repeat
procedures 2 and 3.
5. Press the MENU button to quit.
1
Selection mark (4): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the current
settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons on
the left) correspond to the function
displayed.
the left) correspond to the function
displayed.
<MENU> screen
<Front panel buttons>
Function
Contents
displayed
Forward the menu item.
Reverse the menu item.
–
Lower the adjustment
value. (to the minimum)
value. (to the minimum)
+
Raise the adjustment
value. (to the maximum)
4
Forward the setting value.
1
Reverse the setting value.
EXIT
Exits the <MENU> screen.
DISPLAY AND SELECTION IN THE <MENU>
SCREEN MODE (SETTING)
SCREEN MODE (SETTING)
MENU
CHROMA
PHASE
BRIGHT
CONTRAST
VOLUME/SELECT
MENU
9
00 +01 +39 +40
• • • • • • • • • • • •
LOWER UPPER
6500 9300
AUTO NTSC AUTO PAL
STD. SLOW
* For normal use, leave the COLOR SYSTEM setting to AUTO.
If reception is unsatisfactory in AUTO position, set it to the appropriate color system mode (NTSC or PAL).
* When REMOTE SYSTEM is set to MAKE, and REMOTE ENABLE signal is short circuited (ON), “REMOTE”
is displayed on the ASPECT RATIO setting menu, and Aspect ratio cannot be operated from the front panel.
4 - 3 1 6 - 9
Notes:
● When the screen aspect ratio is set to
16 - 9 (16:9) in ASPECT RATIO, the
picture will be vertically reduced.
picture will be vertically reduced.
● RUSH DELAY sets the delay between
the time the power switch is pressed
and the time power is actually
supplied to the monitor’s circuits.
STD.
and the time power is actually
supplied to the monitor’s circuits.
STD.
: Power turns on
approximately 1 second after
the power switch is pressed.
the power switch is pressed.
SLOW : Power turns on
approximately 3 seconds
after the power switch is
pressed.
after the power switch is
pressed.
* When turning on multiple Color-
Video Monitors simultaneously, it is
recommended to use STD. or SLOW
settings to reduce the rush current
of the entire system.
recommended to use STD. or SLOW
settings to reduce the rush current
of the entire system.
LCT1092-003A-H[EN]3.p65
07.11.8, 4:49 PM
11