JVC TM-2100PN-K Manuel D’Utilisation
7
PHASE
CHROMA
BRIGHT CONTRAST
MENU
VOLUME/SELECT
–
+
EXIT
< MENU >
‰ SHARPNESS
: 00
COLOR TEMP.
: 6500
COLOR SYSTEM
: AUTO
ASPECT RATIO
: 4–3
BRIGHTNESS P.S.
: OFF
Menu items
Purpose
Setting range
SHARPNESS
Picture sharpness
COLOR TEMP.
Colour temperature of
white balance
white balance
COLOR
Colour system
SYSTEM
ASPECT RATIO
Aspect ratio
BRIGHTNESS
Brightness Peak
P.S.
Suppressor function
6500 9300
AUTO NTSC AUTO PAL
4 – 3 16 – 9
OFF ON
00 +1 +2 +3 +4 +5
Front panel
Function
Contents
button
displayed
+
Increases (to max. value)
3
Forwards the setting value
–
Decreases (to min. value)
2
Reverses the setting value
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
Front panel
Function
Contents
button
displayed
PHASE (
)
▼
Forwards selection mark (
3)
CHROMA ( )
5
Reverses selection mark (
3)
Front panel
Function
Contents
button
displayed
MENU
EXIT
Quits (or Releases) the
<MENU> screen
<MENU> screen
1
2
3
4
HOW TO USE THE MENU FUNCTIONS
• SHARPNESS
• ASPECT RATIO
• COLOR TEMP.
• BRIGHTNESS P.S.
• COLOR SYSTEM
You can set the following menu items.
Set them depending on your needs.
Set them depending on your needs.
1. Press the MENU button.
The <MENU> screen is displayed.
MENU
2. Press the PHASE (
) or CHROMA (
) button
to select MENU items.
A selection mark (
3) is put next to the selected item.
PHASE
CHROMA
SHARPNESS
COLOR TEMP.
COLOR SYSTEM
ASPECT RATIO
BRIGHTNESS P.S.
3. Press the VOLUME/SELECT buttons to set.
* Normally set the COLOR SYSTEM to the AUTO mode. If reception in the AUTO mode is not good,
set it to the exclusive mode (NTSC or PAL) corresponding to the received colour system.
4. If you want to set the other menu items, repeat
procedures 2 and 3.
5. Press the MENU button to quit.
1
Selection mark (
3
3
3
3
3): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (7 buttons on
the left.) correspond to the function
displayed.
the left.) correspond to the function
displayed.
Notes:
● BRIGHTNESS P.S. (or B.P.S.) stands for
Brightness Peak Suppressor. This function
is used to suppress (cut) the white peak
portion of the picture, so as to reduce the
picture’s burning on the screen (cathode
ray tube).
is used to suppress (cut) the white peak
portion of the picture, so as to reduce the
picture’s burning on the screen (cathode
ray tube).
● When the BRIGHTNESS P.S. (or B.P.S.)
function is ON, the suppressed white peak
portion (for example, the lit part of a
fluorescent lamp) seems to be blurred.
portion (for example, the lit part of a
fluorescent lamp) seems to be blurred.
If required, lower the setting for the B.P.S.
LEVEL in the <SET- UP MENU> screen
mode, or turn off the BRIGHTNESS P.S.
function.
mode, or turn off the BRIGHTNESS P.S.
function.
● When the screen aspect ratio is set to 16-9
(16:9) the picture will be vertically reduced.
● If REMOTE is displayed in the ASPECT
RATIO or BRIGHTNESS P.S. setting values
in the <MENU> screen, REMOTE SELECT
is set to “ASPT” or “B.P.S.” in the <SET-UP
MENU> screen. In this case, it is not
possible to adjust the setting ranges for
ASPECT RATIO and BRIGHTNESS P.S.
If you need to make adjustments, use the
external control function or turn off the
REMOTE SELECT setting.
in the <MENU> screen, REMOTE SELECT
is set to “ASPT” or “B.P.S.” in the <SET-UP
MENU> screen. In this case, it is not
possible to adjust the setting ranges for
ASPECT RATIO and BRIGHTNESS P.S.
If you need to make adjustments, use the
external control function or turn off the
REMOTE SELECT setting.
<MENU> screen
<Front panel button>
Function
Contens
displayed
▼
Forwards the menu item
5
Reverses the menu item
–
Lowers the adjustment
value (to the minimum)
value (to the minimum)
+
Raises the adjustment
value (to the maximum)
3
Forwards the setting value
2
Reverses the setting value
EXIT
Exits the <MENU> screen
DISPLAY AND SELECTION IN THE <MENU>
SCREEN MODE (SETTING)
SCREEN MODE (SETTING)
VOLUME/SELECT
–
+
MENU
LCT0054-002A-H
02.07.25, 3:44 PM
7