Acer 3210 Manuel D’Utilisation

Chapter 4

69

The system doesn't resume from hibernation/ 
standby mode.

Connect AC adapter then check if the system resumes from 
Standby/Hibernation mode. 
Check if the battery is low.
Hard disk drive
Main board

The system doesn't resume from standby mode 
after opening the lid of the portable computer.

LCD cover switch
Main board

Battery fuel gauge in Windows doesn’t go higher 
than 90%. 

Refresh battery (continue use battery until power off, then charge 
battery).
Battery pack
Main board

System hangs intermittently.

Reconnect hard disk/CD-ROM drives. 
Main board

System configuration does not match the 
installed devices. 

Enter BIOS Setup Utility to execute “Load Setup defaults”, then 
reboot system.
Reconnect hard disk/CD-ROM drives/FDD or other peripherals.
Main board

External display does not work correctly.

Press Fn+F5, LCD/CRT/Both display switching
Keyboard
Main board

USB does not work correctly

Main board

Print problems.

Enter BIOS Setup Utility to execute “Load Default Settings” then 
reboot the system.
Run printer self-test.
Printer driver
Printer cable
Printer
Main board

Parallel port device problems

Enter BIOS Setup Utility to execute “Load Default Settings” then 
reboot the system.
Device driver
Device cable
Device
Main board

Keyboard (one or more keys) does not work.

Reconnect the keyboard cable.
Keyboard
Main board

Touchpad does not work.

Reconnect touchpad cable.
Touchpad board
Main board