Planar PT1545R Manuel D’Utilisation

PT1545R Install Instructions:

If you are using a PC running Windows® 7/8, VISTA, XP, 2000, ME, 98,

NT4.0, follow the instructions below:

1. Power on the PC.

2. Be sure the USB or the RS-232 Serial cable is connected from the PC to the display.

3. Visit www.planar.com/support.

4. Follow the step-by-step instructions as shown on the pop-up windows.

If you are using a PC running driver Linux kernel 2.6.x (32 bit & 64 bit),

follow the instructions below:

1. Power on the PC.

2. Be sure the USB cable is connected from the PC to the display.

3. Visit www.planar.com/support.

4. Follow the step-by-step instructions as shown on the pop-up windows.

If you are using a PC running Windows® XP Embedded, follow the

instructions below:

Express:

1. Power on the computer.

2. Make sure that the RS232 or USB cable is connected to the computer.

3. Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF by

using the EWF Manager command.

4. Once the EWF is disabled click on the XP driver at www.planar.com/support. and follow

the step-by-step instructions as shown on the pop-up windows.

Custom:

1. Power on the computer.

2. Make sure that the RS232 or USB cable is connected to the computer.

3. Follow the step-by-step instructions found in the zipped file at www.planar.com/support.

If you are using a PC running Windows® CE, follow the instructions

below:

1. Power on the computer.

2. Make sure that the RS232 or USB cable is connected to the computer.

3. Using Platform Builder, build an image file by following the step-by-step instructions

found in the zipped file at www.planar.com/support.

If you are using a PC running Linux or Apple

Mac OS, follow the

instructions below:

1. Power on the computer.

2. Make sure that the RS232 or USB cable is connected to the computer.

3. Follow the step-by-step instructions found in the zipped file at www.planar.com/support.