Panasonic VL-GM001 Manuel D’Utilisation
18
Technical data about this product
General Information
Sub Monitor station
Power supply:
Current consumption:
Current consumption:
Dimensions:
Mass (Weight):
Operating environment:
Operating environment:
Installation method:
External material:
24 V DC
Standby: Approximately 38 mA
At operation: Approximately 210 mA
Approximately height 145 mm x width 165 mm x depth 44 mm
(5
Standby: Approximately 38 mA
At operation: Approximately 210 mA
Approximately height 145 mm x width 165 mm x depth 44 mm
(5
3
/
4
″ x 6
1
/
2
″ x 1
3
/
4
″)
Approximately 600 g (1.32 lb.)
0
0
°C to 40 °C (32 °F to 104 °F), Up to 90 % RH
(Relative Humidity) non condensing
Exposure mount
Flush mount (Optional Flush mount unit is required.)
Flame retardant ABS resin (panel: acrylic resin)
Exposure mount
Flush mount (Optional Flush mount unit is required.)
Flame retardant ABS resin (panel: acrylic resin)
Note:
• Design and specifications are subject to change without notice.
• The pictures and illustrations in these instructions may vary slightly from the
• Design and specifications are subject to change without notice.
• The pictures and illustrations in these instructions may vary slightly from the
actual product.
AC adaptor (Part number: PFAP1014)
Power supply:
Output voltage:
Output current:
Dimensions:
Output voltage:
Output current:
Dimensions:
Mass (Weight):
Operating environment:
Operating environment:
100 V – 240 V AC
, 50 Hz / 60 Hz
24 V DC
2 A
Approximately height 120 mm x width 60 mm x depth 35 mm
(4
2 A
Approximately height 120 mm x width 60 mm x depth 35 mm
(4
3
/
4
″ x 2
3
/
8
″ x 1
3
/
8
″)
Approximately 310 g (0.68 lb.)
0
0
°C to 40 °C (32 °F to 104 °F), Up to 90 % RH
(Relative Humidity) non condensing
Note:
• To connect to a chime, make sure the chime is:
• To connect to a chime, make sure the chime is:
– Normal open (Low active)
– Less than 30 V AC (1 A), 24 V DC (1 A)
– Less than 30 V AC (1 A), 24 V DC (1 A)