NEC LCD2070WNX Manuel D’Utilisation

English-8

Controls

OSM (On-Screen Manager) control buttons on the front of the monitor
function as follows:

To access OSM menu, press any of the control buttons (MENU/EXIT, Left, Right, Down, Up).
To change signal input, press the SELECT button.
To change DV MODE, press the RESET/DV MODE button.

NOTE:

OSM must be closed in order to change signal input.

NOTE:

When RESET is pressed in the main and sub-menu, a warning window will appear allowing you to cancel the
RESET function by pressing the MENU/EXIT button.

Brightness/Contrast Controls

BRIGHTNESS

Adjusts the overall image and background screen brightness.

CONTRAST

Adjusts the image brightness in relation to the background.

AUTO CONTRAST (Analog input only)

Adjusts the image displayed to optimal settings.

DV MODE

Dynamic Visual Mode allows you to select setting for Movie, Photo and etc.

Auto Adjust (Analog input only)

Automatically adjusts the Image Position, H. Size and Fine settings.

Menu

Open OSM main menu.
Exits the OSM controls.
Exits to the OSM main menu.

Button

MENU/EXIT

Left/Right

Down/Up

SELECT/
1<->2RESET

RESET/DV MODE

Moves the highlighted area left/right to select control menus.
Moves the bar left/right to increase or decrease the adjustment.
Direct adjust of brightness if HOT KEY is set to ON.
Enters the OSM menu if HOT KEY is set to OFF.

Moves the highlighted area down/up to select one of the controls.
Direct adjust of contrast if HOT KEY is set to ON.
Enters the OSM menu if HOT KEY is set to OFF.

Enter the OSM sub menu. Active the selected function.
Change the Input source.

Resets the highlighted control menu to the factory setting. Switches the DV Mode.

4-Direction-Key

Down

Right

Left