Runco PL-61CX Manuel D’Utilisation

Rear Panel

12V TRIGGER

12V FUSE

RGB OUTPUT

VIDEO INPUTS

RS-232 IN

MADE IN USA

AC 120V 60Hz, 15W

MASK

SCREEN

HDTV

COMPOSITE

V

H

B

G

R

Y

Pr

Pb

S-VIDEO

MADE IN USA

RUNCO INTERNATIONAL

UNION CITY, CA

CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER. NO USER- 
SERVICEABLE PARTS INSIDE. REFER SERVICING 
TO QUALIFIED SERVICE CENTER.

AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

CAUTION

!

 TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.

6

7

8

9

10

4

2

3

1

5

11 12

13

COMLINK OUT

14

This fuse protects the 12v outputs from the MASK and SCREEN jacks.
(Screen Fuse: 5mm x  25mm, AGC, 0.5A, 250V, Fast Blow)

This is a 12V output that can be used to trigger curtains, lifts, etc. (1/4A maximum load).

This is a 12V output that can be used to trigger curatins, lifts, etc. (1/4A maximum load).

This is for systems using serial (RS-232) to control the PFP Controller.

The output of this jack must be connected to the ComLink input of the PL-61cx Plasma monitor.
If this is not connected, neither the Controller or the Plasma can operate.

This is the RGB output of the PFP Controller. Connect the RGB output of the Controller to the PL-61cx’s RGB BNC
port.

This is the input for HDTV or progressive DVD sources.
If the signal is RGB, select ‘RGB HD’; if it is Component, select ‘Component HD’.

This is the input for Component Video from sources such as DVD players.

Note: The component output from a DTV decoder or a progressive-scan DVD cannot be used with this port;

it must be used with the HDTV port.

This is the input for S-Video from sources such as Satellite receivers, S-VHS VCR’s and DVD players.

This is the input for Composite Video from sources such as laser disc players, VCRs and other misc. sources.

Plug in Main Power here.

This is the main AC Input fuse (.5A/250V).

Disconnects or applies main power to the Controller.