Runco PL-61CX Manuel D’Utilisation

50

Use this feature to configure a 2

×

2 or 3

×

3 video wall.

1. On the MAIN MENU, select “OPTION3”, then press

the MENU/ENTER button.
The “OPTION3” screen appears.

2. Use the ▲ and ▼ buttons to select “VIDEO WALL”,

then press the MENU/ENTER button.
The “VIDEO WALL” screen appears.

3. Set the VIDEO WALL using ▲▼ 

 and 

 buttons.

See page 36 to set DIVIDER.
See page 36 to set POSITION.
See page 37 to set DISP. MODE.
See page 37 to set AUTO ID.
See page 37 to set IMAGE ADJUST.
See page 38 to set P. ON DELAY.
See page 38 to set PLE LINK.
See page 39 to set REPEAT TIMER.

4. Once the setting is completed...

Press the EXIT  button to return to the OPTION3 menu.

Note: A contingency method of shutting off the electric
power should be used in cases of emergency during video
wall setup.

Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

DIVIDER

Set the 2

×

2 or 3

×

3 video wall.

Example: Setting “4”

3. Use the ▲ and ▼ buttons to select “DIVIDER”.

4. Use the 

 and 

 buttons to select “4”.

The mode switches as follows each time the 

 or 

button is pressed:

→ 

↔ 

↔

↔

←

OFF, 1 .......

1 Screen (Matrix display function does not
work)

4 ................

4 Screens (2

×

2 video wall)

9 ................

9 Screens (3

×

3 video wall)

* When you select “4” or “9”, set the VIDEO WALL

POSITION.

VIDEO WALL POSITION

Set the position of each display.

Example: Setting “4”

3. Use the ▲ and ▼ buttons to select “POSITION”, then

press the MENU/ENTER button.
The “VIDEO WALL POSITION” screen appears.

4. Use the 

 and 

 buttons to select “NO. 4”.

The mode switches as follows each time the 

 or 

button is pressed:
• 4 Screens

→ 

↔

↔

↔

←

• 9 Screens

→ 

↔ 

↔

↔

↔

←

1 Screen .....

There is no need to set POSITION.

4 Screens

9 Screens