Runco CW-42i Manuel D’Utilisation

When this is ON, signals which are not present will be skipped over and only pictures whose signals are being 

transmitted will be displayed. This setting is valid only for the INPUT SELECT button on the unit.
Example: Set to “OFF”
Press the MENU button on the remote control to display the MAIN MENU on the screen, then... 
1. Use  the   and   buttons to select “INSTALL 1”, then press  the MENU  button. The “INSTALL 1” menu 

appears.

2. Use the   and   buttons to select “INPUT SKIP”.

3. To set the INPUT SKIP mode to “OFF”...

Use the   and   buttons to select “OFF”. The mode switches as follows each time the   or   button is pressed:

  

OFF   ON

4. Once the setting is completed...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

36

OSD
BNC INPUT 

:    COMP

D-SUB TYPE 

:    RGB

RGB TYPE 

:    AUTO

HD TYPE 

:   1080B

INPUT SKIP

 

:   OFF

FACTORY 

:   OFF

      NEXT PAGE

INSTALL 1

SEL.              ADJ.                    RETURN

OFF ........... Regardless of the presence of the signal, scan and display all signals.

ON.............. If no input signal is present, skip that signal.

* “SETTING NOW” will appear during the input search.

Select “FACTORY” under the INSTALL 1 menu.

Note that this also restores other settings to the factory defaults.