Marshall electronic MLYNX17 Mode D'Emploi
Lynx
LCD Monitor User Manual
Lynx
LCD Monitor User Manual
21
TROUBLESHOOTING
1. No picture on the screen
Make sure the power cord is securely connected and that the front LED
is green.
is green.
2. Unable to read menu on screen.
Adjust the resolution of the VGA Card to 1024 X 768 (15”), 1280 x 1024
(17”/19”), 1600 x 1200 (20”)
(17”/19”), 1600 x 1200 (20”)
3. Color Deviation
Check that the signal cables are securely tightened. The pins in the cable
could be loose and causing a bad connection.
could be loose and causing a bad connection.
20
VGA Input
This 15-pin VGA cable (included) connects the monitor to computers and
other devices that support VGA. The 15-pin VGA is a common connection
found on most video cards, computer monitors, and high definition televisions
that support VGA, etc.
other devices that support VGA. The 15-pin VGA is a common connection
found on most video cards, computer monitors, and high definition televisions
that support VGA, etc.
YPbPr
Sometimes called component video, YPbPr is commonly used in video
electronics. Proper connection to monitor is as follows: Y to R/Y, Pb to G/U,
Pr to B/V (Y = green, Pb = Blue, Pr = Red.)
electronics. Proper connection to monitor is as follows: Y to R/Y, Pb to G/U,
Pr to B/V (Y = green, Pb = Blue, Pr = Red.)
S-Video 1
S-Video input and 1 loop-through S-video output
DVI Input
(digital video interface)
Video 1 and Video 2
Two composite BNC video inputs and loop-through outputs
Audio 1, Audio 2, Audio 3
Three mono audio inputs, 3 mono loop-through audio outputs via RCA connectors