Samsung BW-325S Manuel D’Utilisation

18

•

Once the cuff is properly applied and you are seated with your
feet flat on the floor you are ready to take a measurement.

•

To take a measurement, press

"START/STOP" button.  

The monitor will automatically inflate to 
195mmHg. If the monitor senses you 
require a higher inflation level, it will 
automatically increase the air pressure 
to the level that’s right for you.

•

You will feel the cuff get tighter around your wrist - this is 
normal. It should not inflate to the point of discomfort. If this 
occurs, the cuff is secured too tightly. Press the "START/STOP" 
button to stop inflation and  rewrap the cuff leaving more room
between your wrist and the cuff.

•

Numbers will appear on the digital display. 
This is the normal process the monitor goes 
through to determine your blood pressure. 
Don’t be alarmed if you notice the numbers 
quickly change, or go higher than you 
believe your blood pressure to be.

19

•

When your measurement is complete, the monitor will deflate 
automatically, releasing the air pressure in the cuff.

•

The entire measurement process should 
take less than a minute. Once measurement 
is complete your blood pressure and pulse 
measurements will be displayed.

When you take a measurement the monitor automatically 
stores it in memory space number one. As you continue to take
measurements, the monitor will push the previous measurement
back one space. In other words, the value in space one will always
be the most recent blood pressure measurement taken. Your mon-
itor will store up to 48 measurements. To review  measurement in
the memory, depress the "MEMORY" button. Continue pressing
"MEMORY" to review all 48 of your last blood pressure measure-
ments.