ASUS VG248QE Manuel D’Utilisation

2-1

ASUS VG248QE LCD Monitor 

To assemble the monitor base:

1.  Have the front of the monitor face down on a table.
2.  Rotate the arm anti-clockwise 90 degrees. (Figure 1)
3.  Fix the base to the arm by fastening the bundled screw. (Figure 2) (Figure 3)
4.  Align the arrow mark on the base with the two screws to allow 90 degrees swivel 

from either left or right.

We recommend that you cover the table surface with soft cloth to prevent 

damage to the monitor.

•    For  optimal  viewing,  we  recommend  that  you  look  at  the  full  face  of  the 

monitor, then adjust the monitor to the angle that is most comfortable for you.

•    Hold the stand to prevent the monitor from falling when you change its angle.
•    The  recommended  adjusting  angle  is  +15˚  to  -5˚  (for  tilt)/+45˚  to  -45˚  (for 

swiveling/ +110 mm (for height adjustment)/90˚ (for portrait view).

It is normal that the monitor slightly shakes while you adjust the viewing angle. 

Figure 1

Figure 2

Figure 3