ASUS VG27AH Mode D'Emploi

2-3

Chapter 2: Setup

The detachable arm of this monitor is specially designed for VESA wall 

mount.

1.  Disconnect power and signal cables.
2.  Lower the monitor to its lowest height, and then insert the height 

adjustment lock.

3.  Carefully put the front of the monitor face down on a flat and clean

table.

4.  Use a screwdriver to remove the four screwdrivers on the arm (Figure 

1), and then detach the arm from the monitor (Figure 2).

•  We recommend that you cover the table surface with soft cloth to prevent 

damage to the monitor.

•  Hold the stand while removing the screws.

•  The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
•  Use only the UL Listed Wall Mount Bracket with minimum weight/load 28 kg 

(Screw size: M4 x 12 mm).