ASUS VG27AH Mode D'Emploi

3-10

Chapter 3: OSD (On-Screen Display) Menu

Power  LED is not ON

•  Press the   button to check if the monitor is in the 

ON mode.

•  Check if the power cord is properly connected to 

the monitor and the power outlet.

The power LED lights amber and 

there is no screen image

•  Check if the monitor and the computer are in the 

ON mode.

•  Make sure the signal cable is properly connected 

the monitor and the computer.

•  Inspect the signal cable and make sure none of the 

pins are bent.

•  Connect the computer with another available 

monitor to check if the computer is properly 

working.

Screen image is too light or dark •  Adjust the Contrast and Brightness settings via 

OSD.

Screen image bounces or a wave 

pattern is present in the image

•  Make sure the signal cable is properly connected to 

the monitor and the computer.

•  Move away electrical devices that may cause 

electrical interference.

Screen image has color defects 

(white does not look white)

•  Inspect the signal cable and make sure that none of 

the pins are bent.

•  Perform All Reset via OSD.

•  Adjust the R/G/B color settings or select the Color 

Temperature via OSD.

3D function is not working well

•  For “

2D to 3D”: Press the “2D to 3D” hot key  

[

] to turn on this function if the input image is 2D. 

Adjust “

3D Depth” in the OSD menu to adjust 3D 

performance. 

•  For 

Real 3D: Make sure the input source is HDMI, 

and the cable is connected. DVI & VGA are not 

supported for 

Real 3D function.

•  Make sure your graphics card or DVD player 

support HDMI 1.4.

•  Make sure the 3D glasses is used for this monitor.

•  Make sure the computer was installed with 

Microsoft

®

 Windows Vista or Windows 7 operating 

system, and with application of 3D media player.