Seagate ST6000NM0084 Manuel D’Utilisation

Seagate Enterprise Capacity 3.5 HDD v4 Serial ATA Product Manual, Rev. C

  5

  

*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational 

levels.

Altitude, nonoperating  

(below mean sea level, max)

–304.8 m to 12,192 m

(–1000 ft to 40,000+ ft)

Operational Shock (max at 2 ms)

Read 70 Gs / Write 40 Gs

Non-Operational Shock (max at 2 ms)

250 Gs

Vibration, operating

                                    5–22 Hz:       0.25 Gs, Limited displacement

22–350 Hz:    0.50 Gs
350–500 Hz:  0.25 Gs

Operation Rotational vibration

20–1500Hz: 12.5 rads/s²

Vibration, nonoperating

10–500 Hz:    4.9 Grms ref

Drive acoustics, sound power (bels)

     Idle**

2.8  (typical)

3.0     (max)

     Performance seek

3.2  (typical)

3.4     (max)

Nonrecoverable read errors

1 sector per 10

15 

bits read

Annualized Failure Rate (AFR)

0.63% based on 8760 POH

Warranty

http://www.seagate.com/support/warranty-and-replacements/

. 

From this page, click on the “Check to see if the drive is under Warranty” link. The following are required to be 
provided: the drive serial number, model number (or part number) and country of purchase.The system will 
display the warranty information for the drive.

Load-unload cycles 

600,000

Supports Hotplug operation per 
Serial ATA Revision 3.2 specification

Yes