FieldServer FS-8700-88 Manuel D’Utilisation
FS-8700-88 Envirotronics SystemsPlus
Page 5 of 49
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
1.
Envirotronics SystemsPlus Description
The Envirotronics SystemsPlus driver allows the FieldServer to transfer data to and from
devices over RS-232 using Envirotronics SystemsPlus protocol. The FieldServer can only
emulate a Client.
devices over RS-232 using Envirotronics SystemsPlus protocol. The FieldServer can only
emulate a Client.
Max Nodes Supported
FieldServer Mode
Nodes
Comments
Client
1
Only 1 Client node per port allowed
The Envirotronics SystemsPlus driver allows for direct interfacing to a SystemsPlus
Programmer/Controller device. The driver acts as a Client to the device and can be used to
read and set system parameters for status monitoring and control purposes. Combined with
other protocol drivers on a FieldServer such as BACNet, complete SystemsPlus monitoring and
control is made possible via control systems such as Scada.
Programmer/Controller device. The driver acts as a Client to the device and can be used to
read and set system parameters for status monitoring and control purposes. Combined with
other protocol drivers on a FieldServer such as BACNet, complete SystemsPlus monitoring and
control is made possible via control systems such as Scada.
The driver is not available as a Server since a FieldServer cannot fully emulate a SystemsPlus
device’s interfaces. Any existing Server drivers are for FieldServer testing purposes only.
device’s interfaces. Any existing Server drivers are for FieldServer testing purposes only.