FieldServer FS-8700-115 Manuel D’Utilisation
FS-8705-06 GPA (General Purpose ASCII) Manual
Page 14 of 15
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Appendix C. Driver Error Messages
Error
Description and Corrective Action
ASCII:#1 FYI. Port
\"%s\" Connection
Parameters Can Be
Changed Remotely
\"%s\" Connection
Parameters Can Be
Changed Remotely
You can safely ignore this message. It is designed to make you
aware of the capability of the driver. Refer to Appendix A.2
aware of the capability of the driver. Refer to Appendix A.2
ASCII:#2a/b FYI. Port
\"%s\" Setting Changed
Remotely. New Setting:
%s
\"%s\" Setting Changed
Remotely. New Setting:
%s
You can safely ignore this message if the setting reported match
your expectations. The driver is reporting that connection settings
have been changed. The change resulted from a change to the
FieldServer registry settings and this driver has been notified to start
working with the new settings.
your expectations. The driver is reporting that connection settings
have been changed. The change resulted from a change to the
FieldServer registry settings and this driver has been notified to start
working with the new settings.
ASCII:#3a/b FYI. Port
\"%s\" Initial Setting:%s
Start Char 0x%2X
End Char 0x%02X
Termination Time %fs
\"%s\" Initial Setting:%s
Start Char 0x%2X
End Char 0x%02X
Termination Time %fs
The driver is reporting initial settings for port. The message is for
your information only and no corrective action is required if it
confirms you expectations. If it doesn’t review and correct the
configuration file or registry.ini file.
your information only and no corrective action is required if it
confirms you expectations. If it doesn’t review and correct the
configuration file or registry.ini file.