Fujitsu 1300U2 Manuel D’Utilisation
12
Maintenance
1-2
3
Contaminants such as dust, tobacco smoke or ash adhering to your MO drive and MO disks can cause their
performance to deteriorate and can also cause damage to the MO drive itself. Regularly clean your MO drive
and MO disks to ensure that you can continue to use them safely and effectively.
performance to deteriorate and can also cause damage to the MO drive itself. Regularly clean your MO drive
and MO disks to ensure that you can continue to use them safely and effectively.
1.
Cleaning Your MO Drive
First, disconnect the USB cable connecting the MO drive to your computer. Gently wipe away the dust from the
body of the MO drive with a soft dry cloth or a cloth slightly moistened with either water or a neutral detergent.
Do not use volatile solvents (alcohol, benzene, thinners, etc.) as they could cause discoloration or deformation
of the MO drive.
* Never perform maintenance on your MO drive while it is connected to a computer.
* Never perform maintenance on your MO drive while it is connected to the AC adapter.
body of the MO drive with a soft dry cloth or a cloth slightly moistened with either water or a neutral detergent.
Do not use volatile solvents (alcohol, benzene, thinners, etc.) as they could cause discoloration or deformation
of the MO drive.
* Never perform maintenance on your MO drive while it is connected to a computer.
* Never perform maintenance on your MO drive while it is connected to the AC adapter.
2.
Cleaning MO Disks
In general, you should clean your disks using the special cleaner once every three months or so.
◆ The time between cleaning differs according to the operating environment and frequency of use.
◆ The time between cleaning differs according to the operating environment and frequency of use.
* When purchasing cleaning kits, consult the store where you purchased your MO drive.
Product Name
Product Number
Optical Disk Cleaning Kit
CA90003-0702
The optional AC adapter must be connected to the DC jack when:
The power supply performance of the computer’s USB bus is such that the power is supplied
to the MO drive is insufficient for it to operate properly.
to the MO drive is insufficient for it to operate properly.
Follow the steps below to use the AC adapter
1.
Connect the AC adapter to the DC jack.
2.
Plug the AC adapter into the mains power socket.
3.
Connect the USB cable to the MO drive.
Note
When using an AC adapter/AC cable (sold separately), never connect the DC jack to the MO Drive while the
MO drive is in operation.
MO drive is in operation.
Using the AC Adapter (Sold Separately)
1-2
4
DC jack
* When purchasing an AC adapter, consult the store where you purchased your MO drive.
* The DC jack is located on the back of the MO drive as shown in the figures below. Peel off the sticker before use.
* The DC jack is located on the back of the MO drive as shown in the figures below. Peel off the sticker before use.