Fujitsu 1300U2 Manuel D’Utilisation
Check that the MO Drive is connected correctly.
Mac OS 9.0.4 or later
Launch the Apple System Profiler
from the Apple Menu, click the
[Devices and Volumes] tab and
check that High-capacity Storage
Device (USB Magneto-Optical
Device) is among the USB items
listed.
from the Apple Menu, click the
[Devices and Volumes] tab and
check that High-capacity Storage
Device (USB Magneto-Optical
Device) is among the USB items
listed.
Mac OS X 10.0.1 or later
Double-click [Apple System
Profiler] inside the [Utilities] folder
in the [Applications] folder to
launch the Apple System Profiler.
Then click the [Devices and
Volumes] tab and check that
[FUJITSU (MCS3130UB-S)] is
listed among the USB devices.
Profiler] inside the [Utilities] folder
in the [Applications] folder to
launch the Apple System Profiler.
Then click the [Devices and
Volumes] tab and check that
[FUJITSU (MCS3130UB-S)] is
listed among the USB devices.
* On some versions of Mac OS, only
FUJITSU may be displayed.
27
■ Caution
1)
If the MO drive does not appear, disconnect the USB cable from your computer, wait several seconds and then reconnect it.
If it still does not appear, refer to the Troubleshootings section.
If it still does not appear, refer to the Troubleshootings section.
2)
Always connect the MO drive to your Macintosh’s USB port. Operation is not guaranteed if you connect to the USB port on
the Apple USB Keyboard or the Apple Monitor.
the Apple USB Keyboard or the Apple Monitor.
3)
The MO drive does not support the Sleep or Wake functions. Do not use the Energy Saver functions when using the MO
drive.
drive.
4)
You cannot boot up from the MO drive.
5)
When shutting down the Mac OS, eject the MO disk first.
6)
The Multiple Users function in Mac OS 9.0.4 and later is not supported.
■ In Mac OS X 10.0.x
■ In Mac OS X 10.1.x