Fujitsu 1300U2 Manuel D’Utilisation

50

SecureMO Light28 is a program that sets a password to a 1.3GB or 2.3GB capacity GIGAMO disk in order to
protect data privacy.

Once you save important personal data on a password-protected MO disk (called a Secure MO disk), access
to data on the disk cannot be obtained unless the password is entered correctly. This function is convenient to
save secret data etc., and to protect private data which you may not want to be seen by others.

When a locked Secure MO disk is accessed from the application such as Explorer, the alert message such as
“The device is not ready” is displayed. It has been proven that Secure MO disk is firmly locked as for this
message. Please unlock Secure MO disk with SecureMO Light28 when you access data.

● Once a password has been set for an MO disk, the Secure MO disk cannot be changed back to an ordinary

(non-secure) MO disk.

● A Secure MO disk is usable only with an MO drive having the security function.
● Password management is your responsibility. FUJITSU does not have access your password.
● FUJITSU assumes no liability for any damage arising from the use of this program.
● An attempt to use a locked Secure MO disk through Explorer ends up with a warning message such as “The

device is not ready.” The message explains that data on the Secure MO disk cannot be accessed unless the
Secure MO disk is unlocked.

● You should lock Secure MO disk when not using it. If the disk is left unlocked, others may be able to access

the contents of the disk when you are not present.  There is also the possibility that the password could be
altered. Click the [Lock] button or eject the Secure MO disk from the Secure MO drive while it is unlocked.
Shut down or Restart of Windows does not lock the Secure MO disk. Neither does disconnecting or
connecting the SCSI cable.

● When you are finished using a Secure MO disk, be sure to remove the disk from the drive and protect it from

unauthorized access.