Ingersoll-Rand 1111 Manuel D’Utilisation
Form 04585014-Edition 1
3
Product Safety Information
Intended Use:
These Air Ratchet Wrenches are designed to remove and install threaded fasteners.
These Air Ratchet Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Ratchet Wrenches Product Safety Information Manual
Form 04580361.
Manuals can be downloaded from www.irtools.com.
Form 04580361.
Manuals can be downloaded from www.irtools.com.
Product Specifications
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate from
valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse
upstream of hose and use an anti-whip device across any hose coupling without internal shut-off, to prevent
hose whipping if a hose fails or coupling disconnects. See drawing 16571812 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items
identified as:
valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse
upstream of hose and use an anti-whip device across any hose coupling without internal shut-off, to prevent
hose whipping if a hose fails or coupling disconnects. See drawing 16571812 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items
identified as:
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts
be separated by material so that they can be recycled.
be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.
Model(s)
Drive
Free
Speed
Recommended
Torque Range
Sound Level dB (A)
(ANSI S5.1-1971)
Vibration
Level
(ISO8662)
Size
rpm
ft-lb (Nm)
Pressure
Power
(ISO3744)
m/s²
111
3/8”
300
10-50 (14-68)
86.6
97.6
5.6
1111
1/2”
300
10-50 (14-68)
86.6
97.6
5.6
1. Air filter
8.
Safety Air Fuse
2. Regulator
9.
Oil
3. Lubricator
10.
Grease - Inject between ratchet housing and yoke to lubricate
4. Emergency shut-off valve
drive bushing.
5. Hose diameter
11.
Grease - Disassemble ratchet head and lubricate
6. Thread size
components.
7. Coupling
12.
Grease - Inject into grease fitting.