Toshiba MK4006GAH Manuel D’Utilisation
Toshiba Corporation Digital Media Network Company
Page 101 of 153
© 2003, Copyright TOSHIBA Corporation All Rights Reserved
11.8.42.1 SMART Read Attribute values
COMMAND CODE
1 0 1 1 0 0 0 0
REGISTER
REGISTER SETTING
NORMAL COMPLETION
DR
DRIVE No.
no change
CY C24Fh
no
change
HD
no
change
SN
no
change
SC
FT D0h
no
change
This command transfers SMART data as 512 byte data. Upon receipt of this command, the drive sets
BSY, sets the SMART data on the buffer. Then, it sets DRQ, resets BSY, issue an interrupt to report that
the drive is ready to transfer data.
BSY, sets the SMART data on the buffer. Then, it sets DRQ, resets BSY, issue an interrupt to report that
the drive is ready to transfer data.
Byte Description
0-1
Data structure revision number
2-361
1st-30th Individual attribute data
362
Off-line data collection status
363
Self-test execution status
364-365
Total time in seconds to complete off-line data collection activity
366
Reserved
367
Off-line data collection capability
368-369
SMART
capability
370
Error logging capability
7=1 Reserved
0 1= Device error logging supported
371
Self-test Failure Checkpoint
372
Short self-test routine recommended polling time (in minutes)
373
Extended self-test routine recommended polling time (in minutes)
374-510
Reserved
511
Data structure Checksum
BYTE 0-1: Data structure revision number
0010h is set
BYTE 2-361: Individual attribute data
The following table defines 12BYTE data for each Attribue data.