Adaptec MAN-FC2002-001 Manuel D’Utilisation
Setting Fibre Channel Loop Speed (2Gb or 1Gb)
33
1Gb Operation
To set the fibre channel loop speed to 1Gb operation:
1
Remove the LS module from the front of the enclosure.
2
On the LS Module locate the jumper position JP2 (Figure 2-1).
3
For 1Gb operation there should be no jumper installed at JP2. If
one is installed, remove it.
one is installed, remove it.
4
Replace the LS module.
Figure 2-1 Location of Jumpers on LS Module