Adaptec MAN-FC2002-001 Manuel D’Utilisation
RAID Controller Circuit Boards
52
The main parts of the RAID Controller are described in
Figure 4-3 Main components of RAID controller
RAID Controller
Status LEDs
Status LEDs
The RAID controller has 7 Status LEDs as shown above.
Table 6-1 describes what these LEDs signify.
Table 6-1 Controller Status LEDs
1
2
3
4
5
6
7
2
3
4
5
6
7
FC Host Connectors (SSF optical)
HSSDC Connector
Ethernet Connection
RS232
Status LEDs
LED
Description
1
Yellow - Not Ready. Normally Off. Goes On during
power up sequence.
power up sequence.
2
Green - Ready. Normally On
3
Green - Dirty Cache. On when there is data in cache.
4
Yellow - BBU Fault. Normally Off.
5
Green - Partner Fail. Normally Off
6
Green - Device Activity i.e. on drive channels. Flashes
with activity.
with activity.
7
Green - Host Activity. Flashes with activity.