iHome iDM5 Manuel D’Utilisation

NOTE: See the iDM5 Bluetooth Connection Guide for complete pairing details.
1. Move the Bluetooth/Aux-in Switch on the lower right front of keyboard to the Bluetooth position (left).

2.  Press and release the    Button to turn on the unit (the    light will turn blue).
3.  Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions 

to add or setup a Bluetooth device).

4.  Press and hold the    Bluetooth Button on the unit until it flashes blue and the unit beeps twice to 

indicate pairing attempt. The blue light will flash while the unit attempts to pair.

5.  “iDM5” should appear in your device’s list of Bluetooth devices; its status display may indicate “not 

connected”. Select iDM5 to connect. If your device asks for a password, enter 1234 on the 
keyboard of your device. If no device is paired within 2 minutes, the    Button will change from blue 
to red. If this occurs, retry steps 2-4.

6.  Once paired with a device, the blue     light will glow steadily. There should be an indication on 

your device that pairing is complete. On some devices, you must then select “use as a stereo audio 
device” or similar on the device’s Bluetooth menu. Once paired, your device should link to the iDM5 
whenever within range. You can now use the keyboard with the active app on your device, play 
Bluetooth audio and use as a speakerphone. 

P8

5