Tekkeon MP3450 R2 Manuel D’Utilisation

TIP: You can optimize the use of myPower ALL Plus with your laptop computer or portable DVD player by setting
the voltage on myPower ALL Plus to less than the required voltage shown on the laptop computer power supply.
This prevents myPower ALL Plus from charging the device, thus extending the amount of time you can use
myPower ALL Plus to power your laptop computer.

Most laptop computers have a battery voltage of 11.1V or 14.8V, allowing them to be powered with 12V or
14V. Therefore, it is recommended that you set the voltage to 12V first, and then test to see if it will power your
laptop. If not, increase the voltage to 14V, and retest. Repeat this process until you reach the voltage that will
power your laptop.

Most portable DVD players require 9 or 12 volts. Set the voltage to 7.5V and test to see if myPower ALL Plus will
power your device at this setting. If not, increase the voltage by one level and retest.

myPower ALL Plus VOLTAGE SELECTION

Device Type

Voltage on Device

Suggested Voltage on

Power Adapter

myPower ALL Plus

Laptop Computers

14V

12V

16V

14V

19V

14 - 16V

24V

19V

Portable DVD Players

7.5 - 9V

12V

9 - 12V

Digital Cameras

5 - 6V

CD Players

4.5 - 5V

PDAs

Mobile Phones

3.7 - 6V

5 - 6V

Digital Camcorders

7.5 - 9V

12V

9 - 12V

MP3/MP4

This table
provides
recommended
voltage settings
by device type.