Emerson MVME2500 Manuel D’Utilisation

MVME2500 Installation and Use (6806800L01H)

106

1.

Make sure that the 

kernel, dtb

, and 

ramdisk

 are saved in the SD card with FAT 

partition.

2. Configure the U-Boot environment variable:

setenv File_uImage <kernel_image>

setenv File_dtp <kernel dtb>

setenv File_ramdisk <ramdisk>

saveenv

3.

Initialize SD card:

mmcinfo

4. Load the files from the SD card to the memory:

# option: mmc - interface, 0:1 - device 0 partition 1

fatload mmc 0:1 1000000 $File_uImage

fatload mmc 0:1 2000000 $File_ramdisk

fatload mmc 0:1 c00000 $File_dtp

5. Boot the Linux in memory:

bootm 1000000 2000000 c00000

In this mode, the U-Boot downloads and boots VxWorks from an external TFTP server.

1.

Make sure that the VxWorks image is accessible by the board from the TFTP server.

2. Configure U-Boot environment variables:

setenv ipaddr <IP address of MVME2500>

setenv serverip <IP address of TFTP server>

setenv gatewayip <gateway IP>

setenv netmask <netmask>

setenv vxboot 'tftpboot $vxbootfile && setenv bootargs 

$vxbootargs && bootvx'

setenv vxbootfile <VxWorks_image>

setenv vxbootargs 'motetsec(0,0)<IP address of TFTP 

server>:VxWorks h=<IP address of TFTP server> e=<IP address of 

MVME2500>:ffffff00 b=<unused IP> u=vxworks pw=vxworks f=0x80'

saveenv