Emerson MVME2500 Manuel D’Utilisation

MVME2500 Installation and Use (6806800L01H)

25

This chapter provides installation and safety instructions for this product. Installation 
instructions for the optional PMC and transition module are also included.

A fully implemented MVME2500 consists of the base board plus:



PCI Mezzanine Card (PMC) or PCI-E Mezzanine Card (XMC) for added versatility



Rear transition module



SATA kit

The following are the things that need to be done before using the board. Be sure to read the 
entire chapter, including all caution and warning notes, before you begin.

1. Unpack the hardware. Refer to 

2. Configure the hardware by setting jumpers on the board and RTM. Refer to 

3. Install the transition module in the chassis. Refer to 

. 

4. Install PMC module (if required). Refer to 

.

5. Install XMC span module (if required). Refer to 

.

6. Install the board in the chassis. Refer to 

.

7. Attach cables and apply power. Refer to