Emerson MVME2500 Manuel D’Utilisation
Controls, LEDs, and Connectors
MVME2500 Installation and Use (6806800L01H)
57
3.5
Switches
These switches control the configuration of the MVME2500.
3.5.1
Geographical Address Switch (S1)
The Tsi148 VMEbus Status Register provides the VMEbus geographical address of the
MVM2500. The switch reflects the inverted states of the geographical address signals.
Applications not using the five row backplane can use the geographical address switch to
assign a geographical address based on the following diagram.
MVM2500. The switch reflects the inverted states of the geographical address signals.
Applications not using the five row backplane can use the geographical address switch to
assign a geographical address based on the following diagram.
8
TRIG_IN
9
MSRCID4
10
GND
Table 3-18 P20x0 Debug Header (continued)
Pin Signal
Description
Board Malfunction
Switches marked as “reserved” might carry production-related functions and can cause
the board to malfunction if their settings are changed.
the board to malfunction if their settings are changed.
Do not change settings of switches marked as “reserved”. The setting of switches which
are not marked as “reserved” has to be checked and changed before board installation.
are not marked as “reserved” has to be checked and changed before board installation.