Emerson 026-1011 Manuel D’Utilisation

To add a Control System from the navigation tree:

1.

Mouse-over/right-click the site you wish to 
add the control system to (a control system is 
a descendant level of a site).

2.

Click Add Control System. The Control 
System Configuration page opens.

3.

Enter the control system information into the 
fields and click Save. The new control system 
is visible in the navigation tree. Continue to 
add other view levels if desired.

Security settings for InSite are defaulted at the group con-
figuration level normally. Under the Optional section on 
the Control System Configuration page: If the protocol 
checkbox is enabled here (at the control system level), In-
Site will use the protocol information entered at the control 
system level and bypass the information at the group level 
for only the units located under this control system.

It is recommended that a directory structure be set up first, 
but users with administrator privileges can set up users and 

passwords:

1.

Open the Admin Tools drop-down menu.

2.

Click InSite Setup > User Manager. 

3.

Click the Add User button. The User Config-
uration page opens.

4.

Enter the user information into the fields and 
click Save. A user has been created and is 
saved to the database.

You have now successfully created a navigational tree 
structure where you can continue adding directories, sites, 
and other view levels.