HP (Hewlett-Packard) 230859-004 Manuel D’Utilisation

 

 

 

CAUTION:  Properly ground yourself before beginning any installation procedure. 
Electrostatic discharge can damage electronic components. For more information 
about electrostatic discharge, refer to the setup and installation guide. 

 

 

CAUTION:  Disconnect the local I/O cable when not in use. The port and connector 
do not provide a permanent connection. Rear iLO connector performance degrades 
when the local I/O cable is in use, even when the iLO connector on the cable is not in 
use. 

Use either the diagnostic cable or the local I/O cable to perform some server blade 
configuration and diagnostic procedures. Depending on the model, the server blade 
will have either a diagnostic port or an I/O port. The I/O port only accepts the local 
I/O cable and the diagnostic port only accepts the diagnostic cable. If the server blade 
has an I/O icon next to the port on the front of the server blade, use the local I/O 
cable. If the port has no icon, use the diagnostic cable. Refer to Figure 2 to identify 
the I/O icon.