HP (Hewlett-Packard) HP 16500C Manuel D’Utilisation
To trigger after all status bus lines finish transitioning
In some applications, you will want to trigger a measurement when a
particular pattern has become stable. For example, you might want to trigger
the analyzer when a microprocessor’s status bus has become stable during
the bus cycle.
particular pattern has become stable. For example, you might want to trigger
the analyzer when a microprocessor’s status bus has become stable during
the bus cycle.
1
Select the timing analyzer Trigger menu and define a term called
PATTERN to represent the value to be found on the label
representing the status bus lines.
PATTERN to represent the value to be found on the label
representing the status bus lines.
2
Under Timing Sequence Levels, enter the following sequence
specification:
specification:
TRIGGER on “PATTERN” > 40 ns
Triggering after lines are done transitioning
Triggering
To trigger after all status bus lines finish transitioning
1–13