HP (Hewlett-Packard) AWSXCIG-1A Manuel D’Utilisation

2.

Enter the following command:

# manage_enclosure listtrap

[root@n1 sbin] manage_enclosure listtrap
n-enc09CN8734016G:
   172.31.15.240
[root@n1 sbin]#

5.9 LSF Post-Configuration Tasks

To finish the configuration, follow these steps:

1.

Login as root user on the head node.

2.

Set up the LSF environment by sourcing the LSF file as follows:

# . /opt/hptc/lsf/top/conf/profile.lsf

3.

Verify that the LSF profile file has been sourced by finding an LSF command:

# which lsid

[root@n1 sbin]# . /opt/hptc/lsf/top/conf/profile.lsf
[root@n1 sbin]# which lsid
/opt/hptc/lsf/top/6.2/linux2.6-glibc2.3-x86-64-slurm/bin/lsid
[root@n1 sbin]#

4.

(Optional) If you assigned two or more nodes with the resource_management role and
want to enable LSF failover, enter the following command:

# controllsf enable failover

5.

Determine the node on which the LSF daemons are running:

# controllsf show current

[root@n1 sbin]# controllsf show current
LSF is currently running on n1, and assigned to node n1.
[root@n1 sbin]#

6.

Restart the LIM daemon:

# lsadmin limrestart

[root@n1 sbin]# lsadmin limrestart
Checking configuration files ...
No errors found.
Restart LIM on <lsfhost.localdomain> ...... done
[root@n1 sbin]#

NOTE:

Restarting the LIM daemon is required because the licensing of LSF-HPC with

SLURM occurs when the LIM daemon is started. This means that the LIM daemon is licensed
only for the processors that are actually available at that time, which might be fewer than
the total number of processors available after all of the nodes have been imaged and are up
and running.

7.

Update the LSF batch system with the latest resource information reported by SLURM:

# badmin reconfig

[root@n1 sbin]# badmin reconfig
Checking configuration files ...
No errors found.
Reconfiguration initiated
[root@n1 sbin]#

5.10 Verifying LSF-HPC with SLURM

1.

Verify that LSF-HPC with SLURM is running as follows:

5.9 LSF Post-Configuration Tasks

35